Choose a job. Learn by doing.
Walls, floors, bathroom or toilet. Pick up a tool, try each step and see your work take shape.
A safe place to practise. Real building work still needs a project plan, product instructions and the right professional checks.
HWR / YOUR JOB
Make a wall look great
Turn a rough wall into a smooth, painted wall.
STEP 01 / 18 · QUICK CHECK
Start safely
Have the dry wall and old layers checked. Have cracks assessed first.
Why? This gives you a safe, sound starting point.
More detail & sources
Training case: a dry, stable, highly absorbent mineral interior wall using Knauf Goldband E and Fill & Finish Light. The dry finish has been assessed as moderately absorbent for this painting case: Sigmafix Universal (1 part product + 4 parts water), followed by two coats of Sigma Perfect Matt. Not for shower surfaces, persistently damp walls or unknown old coatings. The requested HORNBACH Diepgrond Plus remains a separate alternative route that has not been confirmed for this Sigma combination. This game does not provide a permit, inspection certificate or manufacturer approval. Technical details: Assess the workplace and existing materials Inspect the room, existing layers, access routes and occupational risks. Investigate suspect old materials before scraping or sanding; consult the safety data sheet for each selected product. Preparation must not spread an unknown hazard. For professional work, risks and control measures belong in the RI&E risk assessment and the work plan. Requirements: • Work plan and occupational risks assessed • Suspect old materials investigated before damage • Safety data sheets and control measures available When to stop: If asbestos or an unknown hazardous coating is suspected: do not damage it. First obtain an expert assessment and a suitable working method. Checks: What do you do with an unknown old layer that may contain hazardous substances? Stop working on that layer and have it investigated first The findings determine the safe preparation method; the game cannot replace that investigation. Technical details: Check the substrate and working conditions Check soundness, moisture, absorbency and contamination. This case proceeds only with a dry, stable, highly absorbent mineral wall and a suitable temperature; other substrates require different system advice. Moisture, loose material and an unsuitable substrate can interfere with adhesion and drying. Requirements: • Dry, stable, highly absorbent mineral wall confirmed • No active damp patches or unassessed loose layers • Goldband E conditions: 5–30 °C, including the first 48 hours Checks: Which wall suits this training case? A dry, stable, highly absorbent mineral wall That is the selected starting condition. In practice, it must also be demonstrably checked. Checks: Which temperature check applies to Goldband E? Substrate and ambient temperature 5–30 °C, including at least 48 hours after application This is the product requirement for the selected Goldband E variant; another variant may differ. Technical details: Prepare repairs and transitions Assess cracks, chases, corners and transitions between materials. Have the cause and required repair established. Incorporate specified reinforcement during plastering; do not treat a structural problem as a cosmetic repair. Unassessed cracks or transitions do not disappear just because plaster covers them. Requirements: • Causes of cracks and defects assessed • Required repair and reinforcement established • No unassessed structural defect covered up Checks: What is the correct approach to an unexplained crack? Assess the cause and determine the correct repair and reinforcement Only the appropriate solution belongs in the selected system.
Practise on a dry indoor wall; have a professional assess real work.
The 3D view is a simple model. For real work, use the project plan and the current instructions for your products.
Some product sources below are in Dutch.